MasterRents is also part of the Cat Rental Alliance Program which gives us access to the full line of Caterpillar Equipment.
Steering Articulation 40 Degrees
Steering angle, each direction 40 Degrees
Steering cylinders, two, bore 2.8 in
Maximum working pressure 3500 psi
Hydraulic Cycle Time 9.6 Seconds
Pump flow – Implement pump 40 gal/min
Maximum working pressure 3771 psi
Hydraulic cycle time: 9.6 Seconds
Raise 5.5 Seconds
Dump 1.5 Seconds
Lower, empty, float down 2.6 Seconds
Total 9.6 Seconds
Lift cylinders, double acting: 4.3 in
Stroke 28.7 in
Tilt cylinder, double acting: 5.1 in
Stroke
Static Tipping Load (Full Turn) 16352 lb
Reach – full lift/45 degree dump angle 3.25 ft
Dump clearance – Full lift/45 degree dump angle 9.4 ft
Articulation Angle 40 Degrees
Fuel tank 51.5 gal
Cooling system 7.9 gal
Crankcase 5.3 gal
Transmission 2.2 gal
Differentials and final drives: 5.5 gal
Rear 5.5 gal
Hydraulic system (including tank) 42.3 gal
Hydraulic tank 23.8 gal
Standard transmission max travel speeds: 25 mph
Forward 1 8 mph
2 8 mph
3 17 mph
4 25 mph
Reverse 1 8 mph
2 8 mph
3 17 mph
4 25 mph
Width over tires 8.33 ft
Height to Top of ROPS/FOPS 10.9 ft
Height to Center of Axle 2.2 ft
Ground Clearance 1.25 ft
Overall Length 24.4 ft
Length – Rear Axle to Bumper 6.5 ft
Center Line of Front Axle-Hitch 4.9 ft
Wheel Base Length 9.8 ft
Dump Clearance-Max Lift-45° 9.4 ft
Bucket Pin Height at Max Lift 12.75 ft
Overall Height – Bucket Raised 16.6 ft
Reach at Max Lift and 45° Dump 3.3 ft
Rack Back Angle at Max Lift 54 Degrees
Dump Angle at Max Lift 50 Degrees
Rack Back Angle at Carry 45 Degrees
Carry Height 1.5 ft
Digging Depth 3.8 in
MasterRents has two full time sales representatives to assist with all your rental needs. If you have questions, call us today 978-762-7368 (RENT).
